Things to Keep in Mind About the Batteries and Their Problems
Nowadays,
batteries are used in many things, from mobile phones to boat batteries.
Batteries are used not only in small instruments but also find application in
heavy industry appliances like the scissor lift or cranes—various famous
battery manufacturers here like Panasonic, Energizer, Century Batteries, Sanyo,
etc.
If batteries didn't use correctly, results can damage the battery and even sabotage the appliance. Always use the correct charger for the right rechargeable Rack Battery, as that boosts charging capacity and improves the battery life. Even then, sometimes there are troubles regarding the batteries. Let's examine a few.
A Few Causes for Battery Failures:
- Is the
battery functioning in the same application for which it was designed? It
should work in the application for which it was made. Such as, the automotive
battery cannot be used for deep cycle utilization.
- Is the
application and battery size in accordingly? It means if you are using a less
powerful battery, like a 6V engine battery for a 12V engine, then you will face
issues.
- Is the
Vehicle using extreme electrical accessories, especially those which didn't use
to fitted originally? Many times there are so many extra electrical devices
added to the original vehicle, which raises the load on the battery. For
example, amplifiers, winches, lights, music systems, etc. To complete all the
requirements of these appliances, the battery power capacity must be higher,
yet the battery output needs to exceed the charge consumed. Otherwise, the
battery will consistently be discharged.
- Is the
battery being overcharged? It is a common circumstance that results in the
battery can be damaged. The overcharging compels the electrolyte in the battery
to evaporate. It expands the shedding of the functional materials in the
battery.
- Is the
battery being low charged? Yea, low charging can damage the battery as well.
Undercharging a battery improves the sulphation rates, which increases the
retardation of the batteries from taking any charge. If the battery is saved
for too long without charging, this results in sulphation and thus decreases
the life of the battery also.
- Is there
too many unwanted vibrations? Vibrations are a major negative cause of
premature battery failure. The vibration drives the failed material to get
collected in the mud rack at the base of the battery, and it is impossible to
make a short across the cells.
- Is the battery auto-removed below 10.5 volts? Discharging a battery below 10.5 volts is called in-depth discharge and should not be done regularly to automotive batteries, as this is a wrong application.
Comments
Post a Comment